2.88 Inch IPS Display Module with 480x640 Resolution and 2 Lane MIPI Interface TFT LCD Screen

2.88" IPS Display Module , VGA 480x640 LCD With 2 Lane MIPI Interface 21 Pins

Description

a transmissive type color active matrix TFT(Thin Film Transistor) liquid crystal display (LCD) that uses amorphous silicon TFT as a switching device. This module is composed of a TFT LCD module, a driver circuit, and a back-light unit.The resolution of a 2.88” contains 480(RGB)X640 dots resolution (480 horizontal by 640 vertical pixels array) and it can display up to 16.7M colors.

supports 2 lane interface. the supply voltage (VCC) of driving LCD panel is from is 2.4V to 3.3V. Typical value is 2.8V. It can be used in embedded systems, automation, medical equipment, industrial device, security equipment which requires TFT display in high quality and colorful image. a IPS-LCD type TFT with brightness 450 cd/m2 (typical value). the brightness can be custom designed to 1500 nits for some application does not need high brightness. It can be operating at temperatures from -20℃ to +70℃; its storage temperatures range from -30℃ to +80℃.

Drawing

Screen size: The diagonal size is 2.88 inches. The exact dimensions vary depending on the specific model.

Display technology: It uses IPS (In-Plane Switching) technology, featuring a full-view characteristic, which can provide excellent color consistency and a wide viewing angle. Users can clearly see the screen content from different directions.

Resolution: The resolution is 480x640, which belongs to the VGA level. It can provide relatively clear image display effects and can meet general display requirements.

Interface type: It is equipped with 2 Lane MIPI interface, with 21 pins. The MIPI interface is a high-speed serial interface that uses differential signal transmission and has the advantages of fast transmission speed, strong anti-interference ability, and low power consumption. The 2 Lane configuration can meet certain data transmission needs and can connect well with the main control chip.

Backlight type: Usually, it uses white LED backlight, which can provide uniform brightness and good color performance.

This display has a wide range of applications, mainly including the following aspects:

Portable devices: Due to its small size and moderate resolution, it is commonly used in portable electronic products such as handheld game consoles, portable multimedia players, and handheld computers, providing clear image and video display.

Smart wearable devices: It can be applied to some larger-sized smart watches and smart glasses, used to display information, menus, maps, etc., with the full-angle feature facilitating users to view from different angles.

Industrial control: In the industrial field, it can be used in small industrial control panels, instruments and meters, etc., to display operation interfaces, data parameters, etc. The stability and anti-interference ability of the MIPI interface can adapt to the industrial environment.

Automotive electronics: It can be used as part of the car dashboard to display vehicle speed, fuel consumption, mileage, etc., and can also be used as a secondary screen for the in-vehicle multimedia system, providing auxiliary information display.

Medical equipment: In some small medical devices such as blood glucose meters, blood pressure monitors, and portable ultrasound diagnostic devices, it can be used to display measurement results, operation interfaces, etc., with the full-angle and clear display helping medical staff or users accurately read the data.

FAQ:

1. I want the LCD display 8 digits and the outline size is 65x30x2.8mm………?

Answer: No problem. Firstly, please kindly send us your specification/ drawing paper

If you have not the specification, you can also provide your samples; we will recommend the suitable one

if it is standard products. Or we can customize for you based on your own requirement.

2.This LCD is just what we want, but it is big size, do you have any smaller size? And the display content need to be changed a little.
Answer: For the segment type LCD module, if you need modify the outline size or display content,

a new LCD glass module is need. We have to open new tooling for you.

3. This LCD display is HTN type, but I want STN type,can you make?
Answer: That’s all right . we can change for you as per you request.

4. I want customize a new LCD module. Can you do?
Answer: Yes, we can. Please send your drawing paper. If you have not, please advise me the outline size

of the LCD display, display information( Glass thickness, Polarizer, Display Type, Connector mode,
Storage Temp. Operating Temp. Supply Voltage, Viewing direction, drive condition), we can customize for you.

5. What is leading time for tooling?
Answer: General speaking, it will cost 15 to 25 days after drawing paper confirmation and tooling charge payment,

we can report you the exact time when you confirm the drawing paper.

6. Can you send us samples for checking?
Answer: Yes,. Samples order is available.

7. What is the Leading Time?
Answer: If we have stock for the standard ones, the leading time is one day after payment. If it is the mass production for

special ones, the leading time is about 15-30 days. suppose we can finish earlier, we will report the information in advanced.

2.88 inch IPS Display Module

480x640 resolution TFT LCD Screen

2 Lane MIPI Interface LCD Display Module

2.88 Inch IPS Display Module with 480x640 Resolution and 2 Lane MIPI Interface TFT LCD Screen Images